Powerglide
1.80 Ratio Extreme Planetary Assembly Kit
Part No.28180G-03
乐动ldsports
Sonnax提供排版lete GM Powerglide planetary assemblies in a variety of gear set options and configurations to ensure you get the performance you want without overpaying or sacrificing quality. Each comes fully assembled and ready to install.
Track-proven to 3,000 HP, Sonnax Extreme planetaries are the finest quality Powerglide planetary assemblies in the world. From carrier and output shaft to gears and thrust washers, every component in 1.80 ratio Extreme planetary assembly kit 28180G-03 is refined for maximum durability in the most demanding applications. The ring gears are even pre-drilled for theSonnax stabilizer systemto prevent vibration and broken reverse friction plates. Extreme gear sets feature Sonnax premium sun and pinion gears that also undergo the same advanced processing used in Formula 1™, NASCAR®and other high-end professional racing circuits.
- Top-quality sun and pinion gears undergo additional advanced processing for unmatched durability
- Extreme strength output shaft delivers unrivaled performance and reliability
- Bolt-together carrier for ease of service
See chart and specs below to determine if this planetary assembly suits your application, ordial in options hereto choose your build.
ContenderTrack-Proven to 1,500 HP |
溢价Track-Proven to 2,000 HP |
ExtremeTrack-Proven to 3,000 HP |
|
| Sonnax Warranty | 1 Year(Gears Only) | 2 Years(Gears Only) | 2 Years(Gears & Shaft) |
|---|---|---|---|
| Gear Material | 9310 Suns 8620 Pinions |
9310 Suns 9310 Pinions |
9310 Suns 9310 Pinions |
| Gear Process | 溢价 | 溢价 |
Advanced (Learn More)
Extreme Gears for Extreme PerformanceTo greatly improve the life of Extreme gear sets, the sun and pinion gear undergo the same advanced processing as assemblies developed for Formula 1™, NASCAR®and other high-end professional racing circuits: Advanced Process gears undergo a three-step process that takes aftermarket performance gear manufacturing to a whole new level:
|
| Shaft Material | Long Shaft = 4340 Short Shaft = HY-Tuf |
Long Shaft = 4340 Short Shaft = HY-Tuf |
300M |
| Shaft Splines | Cut Spline | Cut Spline | Rolled Spline |
| Thrust Washers | OE | Steel-Backed PTFE | Steel-Backed PTFE |
| Ring Gear | Standard | Standard | Maximum Duty |
Applies to planetary assembly kits only
- Carrier Assembly & Output ShaftOE Length, 300M Shaft
- Front Gear & Drum Flange12-Tooth
- Ring Gear
- Gear Process Level: Extreme
- Shaft Length Option: OE
- Shaft Material: 300M
- Ratio: 1.80
- Flange Tooth Count: 12
I run a Sonnax 1.80 straight cut gear set and have had no problems or issues, plan on purchasing another real soon for another car we are putting together. Thanks Sonnax for the reliability and durability in your product.
R. MerrillAffordable TransmissionBrooklyn Park, MN