Slip Yoke
Part No.T2-3-8251HP
C4, AOD, Tremec T5, Toploader
Sonnax T2-3-8251HP performance forged slip yoke is an excellent upgrade over factory style transmission yokes, adding strength and durability at an affordable price. The T2-3-8251HP uses1310 series u-joints and fits a variety of applications, including those listed here. These high performance slip yokes deliver superior strength and durability for high horsepower and torque capacity applications, from street car, to street rod, drag strip, to dirt oval track.
- Material: Forged Steel
- Spline Type: Full
- U-Joint Series: 1310
- Spline Tooth Count: 28
- Journal Dia.: 1.499"
- CL to End Length: 6.500"
- Length: 7.250"
- Weight: 2.420lbs
- Barrel Length: 5.130"
Where to Buy
Contact your乐动ldsports or your local driveline shop for availability. If you need assistance finding a shop,fill out the formand a Sonnax driveline product specialist will contact you.
Videos
Learn All About Sonnax Slip Yokes
How to Measure a Slip Yoke
测量OE滑轭与迪特精密工具rmine which Sonnax yoke you need. Length, journal size and U-joint series are critical dimensions requiring accurate measurements.
- Some slip yokes have missing splines — include the missing spline in your count or count the splines on the transmission output shaft.
- Also check if the OE yoke has a counterbore and whether the transmission tail housing uses a bushing or roller bearing.
- ASpline Count
- BJournal Dia.
- CLength (Centerline to End)
- DBarrel Length
- EU-Joint Width*
- FU-Joint Cap Diameter*
*U-joint bores in yoke will be slightly larger than the actual U-joint dimensions given in the chart below.
How to Determine a U-Joint Series
U-Joint Series |
E U-Joint Width (inches) |
F U-Joint Cap Diameter (inches) |
|---|---|---|
| 3R | 2.562 | 1.125 |
| 1310 | 3.219 | 1.062 |
| 1330 | 3.622 | 1.062 |
| 1350 | 3.622 | 1.188 |
| 1410 | 4.188 | 1.188 |
| 1480 | 4.188 | 1.375 |
| 1485 | 4.178 | 1.375 |
| 1550/1555 | 4.964 | 1.375 outside snap rings |
Measure the inside snap ring, indicated on the diagram asG.