June 29, 2016
“'Tween:” How to Identify the ZF6HP Series Valve Body that Bridges the 1st & 2nd Generation Designs
Maura Stafford
Symptoms:
- Broken parts due to excessive line pressure
- Erratic line pressure
- High line pressure
- Restricted converter/lube flow
Cause:
Excess pressure regulator sleeve wear allows fluid loss and/or causes valve hang-up, preventing normal line pressure control.Correction:
Restore appropriate line pressure in all ranges by installing Sonnax drop-in pressure regulator sleeve.Warning:
VerifyOE valve & sleeve measurements before use.
There are some small diameter and length differences that can cause fit and pressure issues if mismatched into the wrong application. It is recommended to measurethe locations shown hereto verify that the correct OE or replacement part is fit into the appropriate application during rebuild.
| Application | A | B | C | D | E | F | G |
|---|---|---|---|---|---|---|---|
| ZF6 Gen. 1, 6R60, 6R75, 6R80 ('09–'14) | .645" | .629" Dia. | .495“dia。 | .568" | .378“ | .629" Dia. | .550“DIA。 |
| ZF6 Gen. 1 w/ 053 Separator Plate | .725" | .657“DIA。 | .511" Dia. | .649“ | .378“ | .657“DIA。 | .586" Dia. |
| ZF6 Gen. 2 | .804" | .629" Dia. | .511" Dia. | .725" | .418“ | .629" Dia. | .562" Dia. |
| 6R80 ('15-Later), 6R100 | .645" | .629" Dia. | .511" Dia. | .568" | .378“ | .629" Dia. | .550“DIA。 |
ZF6HP19,ZF6HP26,ZF6HP32
Pressure Regulator Sleeve
Part No.95740-79
Fits units with 053 separator plate only.
如果...你需要这个 View Instructions 乐动ldsportsVehicles equipped with ZF6HP19, ZF6HP26 and ZF6HP32 transmissions often develop erratic or high line pressure due to excessive wear in the OE pressure regulator sleeve. This wear allows balance oil loss, preventing proper line pressure regulation. Without correct balance oil pressure, the pressure regulator valve will be out of its desired position, resulting in line pressure instability and possibly restricting cooler and lube flow. Installing Sonnax pressure regulator sleeve 95740-79 renews pressure regulator action for revived line pressure control in all ranges.
- Manufactured from highly wear-resistant aluminum
- No machining or special tools required
- ZIP阀门™速度快速且轻松地安装
设备不兼容ZF6HP21/28/34 (Gen.2) units. To differentiate between Gen. 1 and Gen. 2 valve bodies, seeZF识别指南。
Sonnax阀门身体布局提供各个单位的详细概述，使其能够快速且易于确定您正在处理的特定阀体的内容。See all Sonnax valve body layouts.
ZF6HP19/26/32 (Gen. 1) with 053 Separator Plate Valve Body Layout
2014年1月14日
ZF6HP19/26/32 (Generation 1), Ford 6R60, 6R75, 6R80, ZF6HP21/28/34 (Generation 2) Identification Guide
June 22, 2016
ZF6HP19/26/32 (Gen. 1) with 053 Separator Plate Vacuum Test Guide
September 30, 2005
变速器的解剖：泵浦 - PR转换器冷却器润滑油电路中的油流量
Gregg Nader
10月8日，2020年
如何识别类似的ford＆zf6传输 - 在开始重建之前要检查的四个功能
Maura Stafford
如果...你需要这个
所指示的端口的真空测试未能保持推荐的最低型，或者在目视检测到磨损。
相关Sonnax部分
必需的
Recommended
ZF6HP19,ZF6HP26,ZF6HP32
超大压力调节器阀门套件95740-78K
Fits units with 053 separator plate only.
OE阀名称：sys.dr-v
-
Helps cure:
- Broken parts due to excessive line pressure
- Erratic line pressure
- Harsh shifts
- High line pressure
- Restricted converter/lube flow
- Soft shifts
- Flare shifts
- TCC slip
必需的
Recommended
ZF6HP21,ZF6HP28,ZF6HP34
超大压力调节器阀门套件95740-69K
ZF valve name:SYS.DR-V
-
Helps cure:
- Poor shift quality
- Low line pressure
- Flare shifts
- High line pressure
- Harsh shifts
- Burnt converter
- Delayed Reverse
- No Reverse
- TCC slip
必需的
Recommended
6R60,6R75,6R80（2009-2014）,ZF6HP19,ZF6HP26,ZF6HP32
超大压力调节器阀门套件95740-01K
Fits 6R80'09-'14. Cannot be used in units that have a 053 separator plate.
OE阀名称：sys.dr-v
-
Helps cure:
- Poor shift quality
- Flare shifts
- Harsh shifts
- Erratic line pressure
- Slips in Forward & Reverse
- Delayed Reverse
- No Reverse
- TCC slip
